中文版 | English
  About us |  Products  |  Standard parameter  |  Feedback  
Produce is classified
Red circumscribe to accept an iron hull series
The infrared ray receives a to seal the series
The infrared ray receives an other serieseses
Contact us
ADD:Treasure Anne71 areas of Shenzhen City stay the fairy all the way 14 number G2 floors( general merchandise back of Chiang-Nan)
TEL:0755-27661193
      27865113
13809885145(Mr.Yang)
13723456795(Mr.Chen)
Fax:0755-27865183
 
   
     
 
  Type:CHQ1838B
1.Property
* the small-size design ;
* integral IC special
* broad angle and long distance are received ;
* combats that to be worried the capability for nothing powerful ;
* be able to sustain goes beyond environment ray photographs to sound
* low level work ;
2.Application :
* the seeing and hearing material ( acoustics , TV , the video recorder tape engine , the phonograph engine )
* household electrical equipment ( air conditioning , the electric fan , the electric light )
* else do not there is not the string and telecontrol the utensil produce ;
The features size and lead the feet alignment diagram
  3. Application Circuit Diagram:
  4. Block Diagram:
  5. Optic-electric parameter (T=25℃ Vcc=5v f0=38KHZ)

Parameter

Symbol

Test condition

Min

Typ

Max

Unit

Supply Voltage

Vcc

 

2.7

 

5.5

V

Receiving range

L

L5IR=300MA
(test signal)

10

15

 

M

Carrier wave frequency

f0

 

38K

 

 

HZ

Receving Angle

01/2

Range attenuation 1/2

 

+/-35

 

Deg

BMP Breadth

FBW

-3Db and width

2

3.3

5

kHz

Quiescent current

Icc

Input Signal=0

----

0.8

1.5

mA

Low Level Output Voltage

VOL

Vin=0V Vcc=5V

 

0.2

0.4

V

High Level Output Voltage

VOH

Vcc=5V

4.5

 

 

V

Output Pulse
Width

TPWL

Vin=500μVp-p※

500

600

700

μs

TPWH

Vin=50mVp-p※

500

600

700

μs

  ※Tested by optical axis. Receiving width as 600/900μs burst waveform within 5 cm, take average value of 50 receiving pulses.
  6. Testing Signal: Testing Signal :
  7. The maximum parameter :
Item
Sign Standard Unit
Supply tension Vcc 6.0 v
Work temperature Topr -25-85
Store temperature Tstg -40-125
Soldering temperature Tsol 240
  8. Receiving angle picture:
  9.Recommended using conditions:

Parameter

Sign

Min

Typ

Max

Unit

Supply Voltage

Vcc

2.7

-----

5.5

V

Input Frequency

FM

 

38

 

kHz

Working temperature

Topr

-20

25

80

  10. Precautions:
1) Store or use where there is no any force causing transformation or change in quality;
2) Store or use where there is no any corrosive gas or sea (with salt) breeze;
3) Store or use under low humidity;
4) Solder the lead pin within the condition of ratings, After soldering, do not add outside force;
5) Do not wash this device, to prevent static electricity damage to the pre-amp, make sure that the human body, the soldering iron are connected to ground before using.
6) Please pay careful attention to the lens of receivers. It might have a chance to become abnormal when the lens gets dust or dirt, and also please do not touch the lens.
 
 
Copyright © 2006 www.szchq.net All Rights Reserved
本站版权归深圳市诚强光电数码有限公司